So, today I decide to take my car for a little cruise prior to leaving for Cancun, Mexico on Tuesday morning. I started my car and went through my usual rocking of the gear shift lever from side to side checking for neutral ( between gears ) when I noticed that the shifter had an unusual amount of...
The "05+ Roush Mustangs" forum is for posting information directly related to the '05 and later Roush Mustang. This would be anything dealing directly with modifications done by Roush, or any affected parts, or the overall Roush Mustang package on an '05 or later model year Mustang. The reason...
These are settings for Roush Stage 2/3/427/428 vehicles. I would assume the BlackJack cars are the same as well. Specified Range: Camber: -1.50 to -0.50 degrees Caster: 6.60 to 7.60 degrees Toe: -0.06 to 0.14 degrees
So since I got gauges (and haven't done anything useful with them yet) I got one just reading my RPM's. So I notice when sitting at a redlight or whenever stopped, the car will idle at around 900rpm's and just drop to around 700 and then come back up... then, maybe 30 seconds later, do it again....
So... I hated the GT hood with the fake Roush hood scoop. That is the same reason the side of my car does not have side scoops - I think they look cool, but I don't want fake stuff strapped on there. Now if they had vents to cool the rear brakes that would be a different animal... I say...
Not sure how the coupon code thing works with everyone not posting them in forums so Ill just post a link to get it https://www.facebook.com/TeamLethal?fref=ts I was trading in my car for a '12 premier but that looks like its not going to happen now, so when in doubt empty the wallet out. What...
I have been modding my 2005 Roush Stage 2 since I bought it brand new in April of 2005. Decided to go back to stock because how few of this year there are. Many have claimed they have a 2005 Stage 2 but after lots of research working with Roush and others we have found 25 are true factory Stage...
http://i366.photobucket.com/albums/oo106/charliebrown266/photo17_zpsb32b2bff.jpghttp://i366.photobucket.com/albums/oo106/charliebrown266/photo18_zps258504fd.jpghere are some pics of my stripe install!http://i366.photobucket.com/albums/oo106/charliebrown266/photo16_zps95871d62.jpg
Hello All! I was told this is a friendly forum and that I wouldn't be yelled at for not owning a Roush?! :eek: However, I do own a 2006 Mustang GT, so I hope that helps somewhat :D Love all Mustangs and look forward to chatting with you all! Cindy
Tried posting this in mechanical but that's a ghost town. I found something that might be useful for passing emissions without screwing around with guesswork. If you have used the SCT software lately, you'll know there was a new release called "LiveLink-Gen II" and also a new version of SCT...
Have all this waiting in my garage for me http://i99.photobucket.com/albums/l315/bjtheman1/Goodstuff_zps66972476.jpg
I just cancelled my order with VMP tuning for their 40v fuel Boost Pump after placing it two weeks ago, never being told it was on Backorder, 4 phone calls later and 3 e-mails later I never once got a straight answer about when they would be in and today after being lied to again I finally...
So as many of you know, my 4.6L took a dump... It wasn't due to mods, nor racing, or anything I may have caused. This was due to a poor Ford design on their VCT (variable cam timing) system and bad luck I guess. Official diagnosis from Ford was: Ford verified: Engine running rough, scan tool...
I saw a post about this a while back.On my 2003,i see the vent nipple on the pass side but it is capped off.Looks like factory.Is this supposed to be vented?
Hey folks, The 2010 modding season is well underway and I thought I would make a thread updating the mods I have been working on over the winter months. My single biggest mod is the addition of a Snow Performance water / methanol Stage 2 kit. The purpose of this mod has many benefits. First and...
Installed Roush LED boost gauge on 2007 427R over weekend and having a heck of a time getting the illumination like the instructions indicates its capable of. I am wanting white in the day and blue at night. I am wired into 12V accessory fuse for red wire, black wire to good ground, blue to parking...
got an 09 stage 1 roush black on black, 20 in roush wheels, new nitto's, not heavily optioned, 40 k miles,cloth int, stock motor, got a few door dings but in good condition other than that. I would like to know a ballpark value as I am going to try to sell it this summer, kbb, edmunds etc. does...
Has anyone noticed these on their cars? I have been looking for non intrusive ways to loose a little weight on my car and saw this. My car isn't currently here or I would go crawl under it and look.
My car is up for sale as I prepare to buy a 07-09 GT500 next year, and would appreciate some feedback on value. It was a Premium GT before the conversion. The short list: complete Roush suspension, Roush leather seats, M90, T/P/CAI, 5-speed manual, 49,500 miles, garage-stored. When doing the...
This place is a bad influence! I went out to look for wheel weights that were asked about in another thread and ended up putting on my BMR relocation brackets tonight. It went pretty well and only took me about 2 hours. I've got the Roush LCA's with the BMR relocation brackets. For those of you...
Hey everyone! I just installed a new Kenwood DNX 9988HD radio into my BlackJack... It looks great and sounds great as well. Problem is though, is when I am cruising down the street and I'm trying "bump" my radio and shorts out. I mean I think it's my alternator cause it's drawing some much...
I need to start shopping for injectors for my upcoming blower upgrade but I'm having no luck digging through years of posts trying to find the info. Which size injectors do the 3v 4.6 motors use? Are they the same as the GT500 or the newer 5.0 motors? Currently have 39 lb and looking for 47 or 60....
Last November I traded in my P-51A on a 2013 Shelby GT-500. Car sold a few months ago and I'm looking for the new owner. I have lots of stuff that goes with the car that I didn't give the dealer. The car is #100 of 150.
There are so many different opinions/experiences I've read on this forum regarding the 3650 5 Speed. Lot's of different OEM related issues, aftermarket shifters, clutches, people upgrading to T56XL, etc. Fair enough. Everybody is trying to do the mods that get their steed the way it makes them...
http://i1274.photobucket.com/albums/y433/alexsc2/DSC00http://i1274.photobucket.com/albums/y433/alexsc2/DSC00158_zpscd58bbd5.jpg159_zphttp://i1274.photobucket.com/albums/y433/alexsc2/DSC00158_zpscd58bbd5.jpgs2a99b28a.jpg
If I were to purchase American Racing headers with catted midpipe section, would I be unsafe to not have the car tuned. I hear headers can make you run lean but I hear stock roush m90 tune is rich. I am currently stock m90. Also I would like to do the BMR K-member at the same time and was wondering...
Normally I don't get amped up over parts coming but, today was a different story. Whiteline relo brackets, whiteline watts link, BMR subframe connectors and a painted radiator cover. Cannot wait to get this stuff on the car. Appointment for the subframes is Tuesday at 10am. Once that's done, I...
This thread will cover the installation of the Whiteline Watts Link. It's a long post, because that's how I roll, so grab a beer. First things first. I have already driven the car with this thing installed. It is awesome. Epic mod! My car is heavily modded, and this is one of my three...
Just wanting to show my brake cooling kit, i made for my Roush that fits perfectly on the Roush bumper inserts. https://mail.google.com/mail/?ui=2&ik=36d1fd5592&view=att&th=13ebd9b8c20b4af4&attid=0.1&disp=thd&realattid=1435478939372879872-local0&zw ...
I bought a low mileage 09 427r over the winter and was wondering what rpm u guys are shifting them at for the best et at the strip,my car is stock
What do I need to get so I can mount a license plate to the front of my Roush? Thanks Paul
I'll have pics soon. sorry as i am computer challenged. I got my car back today with whiteline watts link,whiteline lower control arms and relocation brackets, BMR subframe connectors(welded in), and DSS-DS. All I have to say is wow! My nitto invo's out back are literally bald with no tread pattern...
Heres the brake cooling kits im made for my roush hope these pics work!! http://s1279.photobucket.com/user/T-rent77/media/20130515_205344_zps72f38633.jpg.html?sort=3&o=0 http://s1279.photobucket.com/user/T-rent77/media/20130515_205115_zps5dc2ea6a.jpg.html?sort=3&o=1 ...
Any ideas on how to fix this without changing entire carpet and how hard is changing entire carpet? Maybe hide it somehow or cut another piece in. <a href="http://s162.photobucket.com/user/codder56/media/001_zps3bbd59cb.jpg.html" target="_blank"><img...
I was reading on another forum where someone had put a 2010 air diffuser on his 07 GT. Supposedly it helps move air through the engine bay and reduces hood shake a lot. Has anyone done anything similar? Here is the post:...
I got my DSS installed today...no vibrations or noise from it. The car definitely seems to get rolling easier and I can't wait to get some track time to see if it helps any!
Comments: The MAF curve on my car isn't very linear below 2000 rpm. Probably a result of having a big free flowing pipe - the air is going pretty slow and the meter might be having a rough time. This results in me, on my particular car, having some _very_ intermittent issues with fueling in...
Hey all - just had original pads replaced w/ Hawks and all is working fine except there is a burning type smell coming from the right rear, borders between electrical and plastic. Have any of you had this happen before? Any ideas what the issue could be?
I would have posted this in the for sale/wanted section but it doesn't seem to get much traffic. From what I've read and heard, the Mac Prochamber with the Roush Extremes sounds killer and before I spend 1000+ for new parts I thought I'd see if anyone on here has a Prochamber (with legs) or...
So I have settled and found a option to my spoiler being faded where my stock racing stripes were after removal. The rest of the car was fine after wet sanding and buffing. So I bought some carbon fiber vinyl.. And found some cool tape that cuts the vinyl. So here's a quick demo on how it works...
I am upgrading brakes slightly and noticed when I pulled my old pads off that the inside front pads are wearing uneven. One side of the pad is worn much more than the other. It looks like it's caused by one piston of the caliper pushing harder than the other. This doesn't seem normal. I've done...
OK, so I'm getting the infamous P0340 code and the first step is to look at replacing the alternator. I'm going to have it tested first and if I need a new alternator is it best to just go with a PA Performance or can I get any alternator? Those of you that have gone the PA Performance route...
I've had my front sway bar end links come loose a couple times in the last three years. The last time around I used some red Lok-Tite. Anyway, I saw this OEM parts upgrade tip on using 2011+ upgraded front sway bar endlinks from user Whiskey11 on another forum. He gets credit for the...
There are currently 70 users browsing this forum. (9 members & 61 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules