 |
|
|
|
            |
|
||||
|
||||
|
||||
04-09-2006, 05:17 AM
|
|||
|
|||
|
roush stage 2 alignent specs
does anyone know if roush has different than factory recc. alignment spec's for the stage 2 suspension. if so please post up. thanks in advance
__________________
 Vortech T-Trim,V.T. forged motor,supercharger cams 
|
|
04-09-2006, 05:51 AM
|
||||
|
||||
|
The Roush alignment specs are the same as Ford specs for the 99-04. I would guest the same hold true for the 05+, but I would verfy with Roush.
__________________
2001 Zinc Yellow S1+
|
|
04-09-2006, 08:27 AM
|
||||
|
||||
|
This is what was delivered with my car. Hope this makes sense and helps.
Front - (same for both tires) Specified ranges Camber: -1.50 to -.50 Caster: 6.60 to 7.60 Toe: -0.06 to 0.14 Cross Camber: -0.70 to 0.70 Cross Caster: -0.70 to 0.70 Total Toe: -0.12 to 0.28 There were no listed ranges for Rear tires, SAI, or turning angles. Check with Roush, they should have a spec list like Steeda has on their website.
__________________
-Steve - '06 Stage 2 Tungsten,Automatic,Roushcharger,2.57 pulley, Roush off-road exhaust,Custom Steeda SCT tune,3.73 gears, full Steeda suspension except springs,auburn diff,Steeda CAI, 400rwhp, 12.43@110.71mph  
|
|
04-09-2006, 06:22 PM
|
||||
|
||||
|
Sorry I don't have the numbers in front of me, but the ROUSH alignment specs are different from the ford specs. I just had the s3 suspension installed last week. The dealer called ROUSH just to make sure and ROUSH confirmed that the numbers are a little bit more liberal than the stock ford numbers.
__________________
 when in doubt,go faster
|
|
04-09-2006, 06:26 PM
|
||||
|
||||
|
I think this is it.Alignment specs questions
|
|
04-10-2006, 09:11 PM
|
||||
|
||||
|
The specs I posted are from the actual alignment sheet included with my car from Roush when I bought it. I'm an 06, but it shouldn't be any different.
__________________
-Steve - '06 Stage 2 Tungsten,Automatic,Roushcharger,2.57 pulley, Roush off-road exhaust,Custom Steeda SCT tune,3.73 gears, full Steeda suspension except springs,auburn diff,Steeda CAI, 400rwhp, 12.43@110.71mph
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
