stage 3 lower grill

[07roushgt]

does anyone make a grill for the lower fascia on the stage 3? is there any aftermarket ones that come close and would work with some modification?

[D ROUSH]

I know someone in the bay area was working on a custom one, no pics yet though

I was there when Roush and Co. stopped to look at Noels Billet grill work and they talked about producing a Roush one but you know how that goes. The Billet sure looks sweet and certainly you can find someone to custome make you one

[family man]

Check out this thread: Grilled

[1Bad06Roush]

I'm not sure this is what you're looking for, but someone just did this. You will have to modify and fab it up to work.
Grilled
Here's where you can find the material.
http://www.mcnichols.com/products/perforated/round/

[FordFan]

Bingo....

[family man]

Originally Posted by FordFan

Bingo....

I thought that was you, but I for got to give you credit. That turned out fnsweet!

[FordFan]

Originally Posted by family man

I thought that was you, but I for got to give you credit. That turned out fnsweet!

Thanks, its still doing well

If anyone is interested I have enough grill material to make up 2 more per my template. Not sure if there is any differance on a Stage 3. What I could provide is a ready to install unit that would be powder coated along with the materials needed for the installation. $50.00 + Shipping - UPS would be reasonable using my work discount.

[07roushgt]

thanks, i'll let you know, i am going to put a call into roush to see if there is chance that they will come out with one or not.

[1sicpony]

i fabbed my own w/stainless wire mesh

[06Roush_st_3]

I am wondering if there is much of a differene in air that gets through that. I live in Vegas so blocking too much air is a very bad thing when it's 110*+. I am upgrading the heat exchanger and adding fans so maybe I have nothing to worry about. I keep getting rocks and crap in the stock heat exchanger to so that sucks as well.

[1sicpony]

that is why i used wire mesh no air flow restriction and it keeps the rocks and other road debris out. my car is an auto and the tranny cooler is right in front to take the brunt of all that enters the lower valance, over time i would suspect that the cooling ability would be greatly reduced and we all know heat kills.

[Frank3]

Originally Posted by 1sicpony

i fabbed my own w/stainless wire mesh

Got picts? I would like to see how it turned out, please...

[FordFan]

Originally Posted by 1sicpony

that is why i used wire mesh no air flow restriction and it keeps the rocks and other road debris out. my car is an auto and the tranny cooler is right in front to take the brunt of all that enters the lower valance, over time i would suspect that the cooling ability would be greatly reduced and we all know heat kills.

Just curious does this look like it restricts air?

[NorCalRoush2]

Originally Posted by D ROUSH

I know someone in the bay area was working on a custom one, no pics yet though

I was there when Roush and Co. stopped to look at Noels Billet grill work and they talked about producing a Roush one but you know how that goes. The Billet sure looks sweet and certainly you can find someone to custome make you one

We are working on customizing a bottom version to match with the top. Hopefully will have it by the new years.