Clunky Noise In Front End

[toolttime]

If some of you have this problem Here a TSB on It. I had to get them for mine.

[RED ROUSH WA]

I ran into this, and the stock rubber strut plate/mounts are poor.
If your running any lowering suspension you should really upgrade to a adjustable camber strut plate system.

J&M Mustang 4-Bolt Caster Camber Plates (2005+) at AmericanMuscle.com - Free Shipping!

Stage 3 Motorsports 2005-08 Mustang Heavy Duty Upper Strut Mounts - Street

Honestly you will feel better knowing that these strut plate/mounts are for carving the corners that Roush was made for.

[toolttime]

This a redsinged upper plate. I had to pay for mine as I had no more warranty. I looked at the ones you said but i have no problem with the caster and camber settings. But if your car is still on warranty get er done for free.

[RED ROUSH WA]

Originally Posted by toolttime

This a redsinged upper plate. I had to pay for mine as I had no more warranty. I looked at the ones you said but i have no problem with the caster and camber settings. But if your car is still on warranty get er done for free.

Yep my warrenty is bye bye so I went with the new adjustable plates. Since I had to pay too.
http://www.americanmuscle.com/2005-c...er-plates.html

[FordFan]

Even though our's is still under warranty I choose to installed the Steeda robust upper mounts last spring just because I believe in being proactive...
Heavy Duty Upper Strut Mounts - Street - '05-'09 Ford Mustang



=-=-=-=-=-

[EAGLE 5]

I'm going to replace mine with Shelby GT500 strut mounts when I'm going to install the stage 2 suspension on my car. They are stiffer then the GT's but will still be compliant and quiet over the bumps not to mention they're only about 60 bucks.

[toolttime]

Originally Posted by EAGLE 5

I'm going to replace mine with Shelby GT500 strut mounts when I'm going to install the stage 2 suspension on my car. They are stiffer then the GT's but will still be compliant and quiet over the bumps not to mention they're only about 60 bucks.

I beleive that is the replacement strut mount you get for a replacement. Tech at Ford dealer told me this.

[EAGLE 5]

It's possible look at the CS bumper same as the GT500 but priced differently because of the "SVT" moniker on the Shelby parts.

[Blow-By Racing]

A little more FYI ; we have seen on the Roush car with a clunk or bump. We have had a few cars that have the front end links loose. Its simple re-torque.