 |
|
|
|
            |
|
||||
|
||||
|
||||
10-03-2008, 06:12 AM
|
||||
|
||||
Help please
Last year I put those billet armrest covers that go around the window controls on my car to dress it up a little. Ever since then I've thought I had a blown door speaker, well the speaker is fine. The damn billet things are vibrating when the base is pounding. These things are held on with the typical double sided adhesive tape. What's the best way to get them off without screwing anything up? If they leave adhesive behind what is the best way to get that off?
Thanks.
__________________
Grabber Orange 427R #07-486 Roush Short Throw Shifter  FRPP 3.73 Gears  Roush 73mm Pulley and Tune   Planned Mods: MAC Pro-Chamber, Drag Radials to name a few.
|
|
10-03-2008, 06:12 AM
|
||||
|
||||
|
Goo Gone...
|
|
10-03-2008, 08:27 PM
|
||||
|
||||
|
put a hair dryer to it to help it release when removing...
__________________
|
|
10-04-2008, 06:28 PM
|
||||
|
||||
|
Thanks, I'll do that.
__________________
Grabber Orange 427R #07-486 Roush Short Throw Shifter FRPP 3.73 Gears Roush 73mm Pulley and Tune Planned Mods: MAC Pro-Chamber, Drag Radials to name a few.
|
|
10-06-2008, 03:36 PM
|
||||
|
||||
|
I used the hair dryer idea. Worked great! Just let the billet covers heat up and they came right off. Then used the hair dryer to heat up the adhesive that was left behind and it rubbed right off with my thumb. Awsome advice, thanks!
__________________
Grabber Orange 427R #07-486 Roush Short Throw Shifter FRPP 3.73 Gears Roush 73mm Pulley and Tune Planned Mods: MAC Pro-Chamber, Drag Radials to name a few.
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
