Forum: 2010-2012 Roush Mustangs

WOW this thing is crazy!!!!! Throttle response is incredible.... It was good with the 540 kit, polished with the phase 1 kit.... but the jump from phase 1 to phase 3.... night and day. Question for anyone else running this kit... Do you get a buzzing sound coming from the front of the car??? I am...

Hey if anyone knows where i can find a Roush Stage 3 automatic let me know.

A local guy has a 2010 427R and bought the dual fan afco heat exchanger but the shop he was getting to work on it said it won't fit behind his bumper cover. I have the same unit on my 09 with 0 issues. I know they did a redesign in 2010, but I don't see why it won't fit. Anyone got one on...

My front fender stripe is tearing at the top and my roof and hood stripes are showing some breaking, cracking on the ends. I was really unsure about the Stage 2 striping until I saw the car being driven on the lot and fell in love with the stripes. Please tell me Roush doesn't expect us to...

I've had my 540RH for almost 2 years and i haven't done any mods to it. The only things that I've added are SOS pillar dual gauge pod w/boost and fuel pressure gauges, SHR push button start and a CS/GT front valance w/fog lights and the Boss 302 splitter. Ive finally decided to spend some money...

Hey fellas, So during the day or when it's not quite dark yet, I love the bright pure white look on my Roush gauges. When the sensor senses it's dark enough, it reverts to the My Color schemes, which are awesome by the way. The thing is, I would like the option of going with that pure white late...

Dropped the Car off this weekend to ROUSH certified installer: Capital Ford Rocky Mount, NC to have some work done... ROUSH Phase 2 TVS w/Calibration I have a set of Stoptech 4-piston Brakes w/Slotted rotors as well....I will be installing those next week when I get the car back. Going with...

Looking to trade my Roush in for another Roush and not getting much credit if any for the TVS. Looking for a local fnsweet member that wants to swap with me. I have the dual belt setup with gt500 dual fuel pumps. Looking for $4200 to swap and pay to have them swapped or I will help if do it...

I thought I get the cars together and take some pictures. For the most part I think they came out ok. If anyone else has some pictures they'd like to share, feel free to post!!! http://i1184.photobucket.com/albums/z334/10Roush427r/IMG_2265_zpsf7f56f17.jpg ...

Hey Guys, Well, after almost 2 years of searching I finally found and purchased the Roush I've been looking for -a 2010 Stage 3 in Sterling Grey Metallic!! I'm super excited about this car!! Before I go into more details about the car, I just wanted to thank John from Ray Skillman Ford for...

I've waxed the car a few times but have yet to get into a serious detail job. I plan to do this all next week as I have a charity car show I am attending in Waco for the West, TX victims and want the car clean but well protected from road debris. All that said I will be clay baring the car...

I've ordered an off road H pipe today, and I know that my car will be VERY loud now. I'd like to quiet it down and get some mufflers (preferably Flowmaster delta 40's), but there seems to be a problem with getting axle back set ups to fit with the Roush rear fascia. Does anyone have any...

Hi guys, Here are a few pictures of me getting the RS3 ready for the car show... PHASE 3 kit is still on the way :( That is a ZL1 Camaro next to me... AWESOME car. I am a big fan:D :bang: ...

After a lot of going back and forth on which tune to use, I decided to stay Roush. I installed the phase 2 upgrade and had a dyno done. Results----545rwhp 452tq. Almost spot on to what roush said it would be. I am a little rich at the top from what he told me and could get another...

I just bought the Phase 1 to Phase 3 upgrade kit... CAN NOT wait!!!!!!!!!! woooooooo sorry. Anyways, I'll post some videos once the parts get here. I'll do a before and after comparo. :usa:

...let's continue the discussion on how useless these stripe packages and convince ROUSH to do something really great, like a 600 hp RS4. To review, many think the Hyper is ridiculous. Just another reissue of the same old tired RS3 (with less HP then the 4.6 RS3). Famous Kool-Aide drinker,...

Started the car up Friday night to hit the local car meet and let her idle a few minutes to warm up. Got a very rough idle then a check engine light. Having car towed all the way to Five Star Ford Plano as they are the closest Roush dealer. Still under warranty but I always worry about lot guys...

Hello All, I am having my rear axle painted in 2 weeks, when I have some more suspension/chassis work done, and kindly wanted some advice. The shop doesn't specialize in painting, and are a performance shop doing me a favor. Seeing as I doubt they can/will do all the prep work like sanding,...

my mother was put in hospital last night and I was driving up here to see her and was a nice day and took the stang... 1/2 mile from hospital I guess some one didnt like my car and threw a rock the size of a baseball at car.. I was at stop light and heard a big bang and the light just turned green...

I am going to take it up a notch, and give this car some real power, the below is what will be done to the engine, also changing the 3:73 gears to 3:31 and adding Whiteline watts link & MT ET II tires. I am looking for advice on getting this to hook up and what else can I do to get this done,,...

Most recent mods listed and pictured below. Check em'out .... - billet upper grille with body color matched grille surround - DSS single piece drive shaft - Eaton Truetrac differential - FRPP 3.73 gears and all new carrier bearings and seals - Whiteline Watts link - Aeroforce Interceptor...

Just got my car back from the dealer, it's really a huge improvement!! I use to feel that something was holding my car back when I had the 540 kit, not anymore. it really feel liberated! My Dyno butt is happy. But, I'm noticing that the new S/C belt (I believe) is squealing briefly when I start...

After pentalab put this kit on his stang I ordered same kit... easy plug and play and hi and low beam... I have on my car but paid $139. this is a great deal and i just ordered another kit for backup and in case I get tired of the 8000k light blue light... this kit is the bright white...this kit...

I am starting slowly because of lack of funds but will speed up soon I hope. I am going to start with the rear suspension and will be ordering LCA relocation brackets and control arms. Which brackets and arms have you installed that you are happy with? I have read many threads with a lot of...

I'm putting a B&M tranny cooler on and need help.. I do not want to cut the transmission line.. I want to use barb fittings. I do not know what size to buy to work... I can not find any thing on the Internet and even wrote summit racing and they said if I could tell them the thread size they could...

I started removing everything needed to replace my plugs tomorrow when the new ones arrive and thought I would start soaking them just to make sure I had no problems tomorrow and noticed my plugs were just snug tight. What should I tq the new ones back to on 2010? They honestly broke loose with...

http://i596.photobucket.com/albums/tt45/walker2t/28a5d5b8a706da417475487214508524.jpg

Upgrade to the new roush CAI with jdm tune( currently running the jdm stg 4 upgrade with FRTB) OR purchase a DSS DS. OR buy a Shelby lol Gonna invest in some LAC relocating brackets as well. :cheers: Rob

I am researching the possibility of adding a ROUSH TVS to my 2012 5.0L.... Most people are telling me to get a "Tuner Kit"...but that along with the CAI/Pulley/SCT Tuner and Custom Tune is more expensive than the Phase 2 kit!! (which includes all the above) My question is....can you add a...

Looking for a Strut Brace that will fit on my Stage 3 2012. I will also be doing the Phase 2 upgrade real soon so the new Cold Air Intake may be a factor. Been searching for months now. CAN ANYONE HELP !!! Thx Mark

Took car out last night with family for a two hour drive after 5 months of storage...I was cruising around indy's biggest race track (465). Doing about 85 sustained mph going with the flow of traffic :) my daughter was sitting in back seat and said she was going deaf! I said what noise? She said...

Just Got the Stage 3 - Phase 3 Upgrade Kit. Installing it a soon as it arrives. Cant Wait.

A friend of mine has a 2010 427R and wants to hook up his new Air/Oil separator but he says his line coming out of the valve cover does not go back into the intake ( Drivers Side ) without seeing it to know if it goes to the back of the supercharger it should be ok as long as it is under vacuum any...

Do you guys have any review or recommendation with this rear rotors, $179 compared to the Baers 14" mode for $600. Internet reviews are pretty good for vehicles like Nissan and Acura....

I just replaced the stock throttle body with a FRRP 62mm Throttle body and I noticed there was some oil on the surface of the supercharger inlet. Anybody ever see that? Do I really need an oil separator? The TB was really dirty and I only have 18500 miles on it! I also changed the spark plugs with...

A friend of mine told me about a 2012 Stage 3 with 7k miles on it for 30k.Car is beautiful.Its up around chicago. Is thiat a good price?

Title says it all. Due to wanting to keep my warranty in place I will doing the phase 3 upgrade this summer simply because I want too but am hearing you wont get any more noise from the TVS. I know it will never sound like a Terminator but something is better than nothing. I've seen the sema...

was at the track a couple of weeks ago and the 540 ran 11:03 @ 126 mph with slicks and skinnies in Bradenton, FL. 31118