Forum: 2010+ Roush Mustangs

LIVONIA, Mich. – March 18, 2010 – ROUSH Performance® and Barrett-Jackson have teamed together to offer a limited edition, high-performance version of the Ford Mustang. The concept car for the Barrett-Jackson Edition ROUSH Mustang will be sold at No Reserve during the 8th Annual Barrett-Jackson...

:(:(:(:(So today I was on my way to meet a friend. I had just put fuel in my car and was on my way to meet her. IT was a 4 lane road with a turn lane in the middle. IT was a red light and when traffic had stoped I had one of the cars wave me through. As soon as I did I made my way between the...

If you're in Kentucky this probably makes sense................... LEXINGTON, Ky. – It's not so much a mid-life crisis as it is a March Madness diversion. With the post-season about to begin, Kentucky coach John Calipari will soon be seen cruising around town in a ROUSH® 2010 Mustang. The new...

It has been a long time since Roush offered V6 Mustangs. In fact many dont even know that you could get a Roush V6 back in the 1999-2003 era. And in 2008 the company dabbled with a V6 model too, but there weren't many takers. With 2011 the Mustang now comes with a standard 305hp DOHC...

Has anyone heard or have the specks for the new 5.0. Im mainly interested in 0 to 60, 1/4 mile time and trap. Just wondering what kind of competition is going to be out there.

I pulled up to the post office in here in Brentwood, TN and I see this sweet looking mustang, sure enough it was a 2010 Roush 427 black vert. Was looking at it and the owner was walking up to get in the car and leave. I told him that about fnsweet.com and hes actually a newb..dont know his name. ...

How much oil is contained in the 2010 M90 Roushcharger?

I am close to purchasing a 2010 Stage 3 Roush but want to know if I should wait on the 2011 Stage 3 (if one is made). I here the 2011 models may have an aluminum block which will make the car lighter and faster. What are your thoughts?

Roush says they will offer a 427R (or something like that) but no details available yet. The Shelby GT350 details are here: http://www.shelbyautos.com/vehicles/2011GT350.asp I contacted Shelby and got info on how to purchase one of these babies. Anyway, I wanted to get opinions on what folks...

Hey Guys, just wondering how the cooper's are wearing on your cars. My 427R came with Dunlaps. Your opinions greatly welcomed:D

I was going through my photos from the SEMA Show and came across these. This is a product that Grant Steering Wheels is working on. When I spoke with them they said they were working to have them on the market this spring. If you look at the first photo which was of a poster, you will see the...

Is going to one of the new hoods for the 2011? Just wondering, looks kind of nice with them louvers. Dave

Hi brothers and sisters, I just got a quote for Kooks 1 3/4 long tube headers with catted H pipe installed, labor dyno tune for 2369.00 out the door? what you think too much or in reason. It's from Percesion motorsports here in the new port richey,Fl. area:Please let me know what you...

I am taking delivery of a 2010 Statge 3 next week. I am considering mods from JDM; pulleys, tune, headers, cam...they claim another 130hp at the fly wheel. Has anyone made these mods?

I just read on the powerblock and roush website that in the month of may horsepowertv on spkie will have a episode where their going to transform a 2010 into a roush stang. From the pictures it looks like they will bolt up a roushcharger not a TVS. Maybe they could install the trak pak...

So I went to crank my Roush up the other day and it backfired when I started it up. and now when I try to open it up on the road it sputters spits and sounds like some one pulled an injector off of my car. I dont know what the deal is/. any one have any ideas? I am taking it to the dealership...

is it available on the stage 3? What about the glass roof? I saw an ad for a stage 3 with nav but there weren't any interior pics.

My wife is experiencing a mid-life crisis. She grew up with her sister and brother owning late 60's Camaros. She now wants to get a muscle car - she likes the power and exhaust. No harm there! Anyway, we test drove a Camaro SS and she loved it. I had read about it some and didn't like the thing the...

I just signed up to run the 427R at Barber Motor Sports. Thought I would share with fellow Roush owners, even though it is a porsche group. Hope to see some of you all out there! Click on event registration on the lower left corner. :: PBOC ::

OK brothers and sister Roush owners, I'm probably gonna go with the 3.73 gears, so what do you think about KooKs longttube headers with a H pipe not the X pipe, worth it or not. I like the sound of the H pipe over the X. Thanks in advance for your opinions.-Tony :D

A coworker told me there's an article, Lingenfelter Camaro vs the new Stage 3. I've looked everywhere for a copy but haven't had any luck. Can anyone confirm this article, what publication and what month?

Are the plugs in the new 5.0 like those in the 3 valves? Was concerned that they would be deep seeded and subject to breakage as in the 3 valve engines? Would hope that Ford would change this issue with the new engine.

Hey brothers ,it's me again. I got a pair of New Roush rear billet lower control arms for a great price-159.25 shipped from Amazon. I think they screwed up with the price, cause Roush wants 279 plus shipping. Now my question is ,what will lower control arm relocation bracket do for the car. I don't...

Hi brothers and sisters, ford racing has a new strut tower brace for the 2010 GT500, Does anyone know if it'll fit our Roush 427R"s and Stage 3 cars?-Thanks :confused:

Hey brothers and sisters, does anyone know of a performance shop here in Florida(Hudson,Tampa area) that does performance work like JDM up in New Jersey. Boy I wish they were done here>thanks:o

Got a 427R, we have not mounted the front license plate yet, 2 months go by and then the wife gets a ticket! :( We live in Texas and you have to have a forward facing plate on the car. I have the plate on the dash in the windshield to buy some time for now. Hate the way this looks. I was...

Just picked up my 427R yesterday and definitely excited. It really is a nice handling machine with good power (if history repeats itself it won't stay stock). Just curious, with my Evo the big thing to do is to change the fuel pump, increase the fuel injectors and run E85 (effectively 100+...

2011 Mustang GT 5.0 Coupe Grabber Blue 6spd Brembo brake pack 3.73 L/S Axle HID headlights Security package Navigation/10gb hard drive Upgraded interior

Anyone else going? From what I understand he is giving them an award for being the Dealership that sold the most Roush Mustangs last year.

New member of Jack's kids. Whats the most effective way of bolting on xtra horsepower without blowing up the bottom end? Thanks, Guys

Ok, I know I have to take it easy during break in, and street racing is dangerous, but this evening, I had this guy in a SRT-8 trying to show me what had. To make a long story short, I hope he liked what the rear of the 2010 Mustang looked like. :bang:

A while back somebody posted pics on another thread about getting these cars to hook up without sacrificing handling. I have been looking for an hour and can't find it for the life of me. I thought it was in one of the rear gear threads but can't find it. It wasn't a watts link set-up and I need...

Fellow club members, Where can I get a smaller blower pully for the 2010 press-fit superchargers?

Here is a shot of the new 2011 Mustang GT from the Detroit Auto Show in the new color for 2011, Blaze Yellow Tri-Coat Metallic.

What is the thread size in the end of the shaft where the pulley is ?

I am very intereted in people's experience with the RS3 Cooper tire on the track. The tires seems like a decent street performance tire, but since I will track the car both in road racing and test and tune days at the drags, I am looking to get tires with a larger footprint and a stickier compound....