|
It was a kit from ford racing which included the wire harness, extra fuel driver module, relay. It now has 2 fuel module drivers one for each pump. Only thing I neede to get was a roll of 1/4 loomix to protect the power wire to the front fuse box from the . Was not hard to do at all. The instructions you can see on the ford racing site under the gt500 pump. Tight fit getting the new pump into the tank but with a little patince it went in. The pump was under the rear drivers side seat. Ford says this should be used on anything over 400 h/p. The single pump is running at full pressurre all the time which it can not handle as it was not designed for this . That's why the shelby uses this pump. If anyone does the install I can help you out.
__________________
|