2001 Stage III questions

[Roush2vfox]

I'm trying to get to a point to fire this motor up, I dropped it in a '92 fox coupe. I need to know:

1. What thermistat to run? (temp wise)
2. When do you change the blower oil?
3. What plugs to run with the 2.57 pulley, longtubes and a tune?
4. Also the torque specs for the bolts that hold the intake/intercooler to the heads, and blower to the intake.

thanks in advance for any info. Joe

[skeestage3]

hmmm i didnt know we have to change the blower oil loll anyone know info on this?

[Shay]

Here is our collection of technicals on the 2001-2004 Roush Mustang supercharger system. There is a PDF manual link in there as well.

http://www.fnsweet.com/about/stage3_101.shtml

[JR'S STAGE2]

Originally Posted by Roush2vfox

I'm trying to get to a point to fire this motor up, I dropped it in a '92 fox coupe. I need to know:

1. What thermistat to run? (temp wise)
2. When do you change the blower oil?
3. What plugs to run with the 2.57 pulley, longtubes and a tune?
4. Also the torque specs for the bolts that hold the intake/intercooler to the heads, and blower to the intake.

thanks in advance for any info. Joe

I used a 180 degree thermostat.

I changed the blower oil in mine when I purchased it from someone here used. Don't know that it needed it but I felt like I should.

I went with the NGK plugs.

The torque for the intake/intercooler to heads is 20-30 nm(newton meters) which is about 15-22ft lbs. They need to be tightened in sequence also.

The blower bolt torque is the same as the intake.
Pages 31 & 32
http://www.fnsweet.com/docs/2001_SC_manual.pdf

[Roush2vfox]

Thanks alot guys, I knew you could help a brotha out!