Dyno session

[1BAD360R]

O.k, getting closer to the goal of 410-420 rwhp.. Yea, its close to being on the edge, but thats OK with me.. So far, all bolt on parts..The numbers look good when you look at the whole equation.. Picked up about 22 ft-lbs at 5100rpm and 22 hp @ 5400rpm.. Had nice gains from 3500 rpm - 6000 rpm in both hp and torque... Had a fuel mixture of 100+ w/ 91 octane..The changes from the 377 rwhp was: Headers, Bassani x/cats, Demolet CAI and 90 mm maf.. Would of really liked to post gains of each addition, but the $$$ to do it didn't make sense.. Car was tuned with SCT x-cal at AKRON HORSEPOWER. Thanks to Eric and George..They have been solid !!!!! Yes, there is more in it.. I'm changing the mufflers and the platinum plugs for Flowmasters ( maybe Spintechs ) and a copper plug..Hopefull will pick-up 10 hp with these..Also, time was very late and we feel the a/f could use a little more clean up..

[IMG][/IMG]

[RoushRocks]

O.k, getting closer to the goal of 410-420 rwhp.. Yea, its close to being on the edge, but thats OK with me.. So far, all bolt on parts..The numbers look good when you look at the whole equation.. Picked up about 22 ft-lbs at 5100rpm and 22 hp @ 5400rpm.. Had nice gains from 3500 rpm - 6000 rpm in both hp and torque... Had a fuel mixture of 100+ w/ 91 octane..The changes from the 377 rwhp was: Headers, Bassani x/cats, Demolet CAI and 90 mm maf.. Would of really liked to post gains of each addition, but the $$$ to do it didn't make sense.. Car was tuned with SCT x-cal at AKRON HORSEPOWER. Thanks to Eric and George..They have been solid !!!!! Yes, there is more in it.. I'm changing the mufflers and the platinum plugs for Flowmasters ( maybe Spintechs ) and a copper plug..Hopefull will pick-up 10 hp with these..Also, time was very late and we feel the a/f could use a little more clean up..

[IMG][/IMG]

so you're saying your at 399 HP now?

[spindlecone]

Lets see a computer printout, have never seen a pencil written dyno sheet

[1BAD360R]

so you're saying your at 399 HP now?

No, at 394 right now..

[1BAD360R]

Lets see a computer printout, have never seen a pencil written dyno sheet

OK, here ya go...Last years session

[IMG][/IMG]

Recent session:

Now this is the one I put on the top sheet to compare the 3 sessions.. The REASON I had to do it in pencil was due to the facility having a computer fire last year and they didn't back up their files, so this was the only way I could do it without having a program to super impose all the graphs...

[IMG][/IMG]

[spindlecone]

lookin great

[1BAD360R]

lookin great

Thank you..

Also, thanks to GotKick for the Maf...

[STAGE 4.6]

Nice #s i love those 360s & 380Rs i would really consider selling my Roush if i find a good deal on one?

[dsperrine02]

nice...my 360R put down 383 rwhp in colorado, elevation is killing me, with a pulley, sct tune, bassani cat back and mac off road H-Pipe, 3.73s, although they dont help with the HP. Ill try to figure out how to get my printout up here, only making 7 LBS of boost at this elevation too, from what i understand should be around 8 lbs

[STAGE 4.6]

Hey buddy! are you the guy that came by the site on Ft. Carson? If so you put down some nice #s also. btw iam one of the instructors here.

[04roush2]

Hey buddy! are you the guy that came by the site on Ft. Carson? If so you put down some nice #s also. btw iam one of the instructors here.

Hey, we call u everytime we out but u always down in Pueblo so.....


U need to come out this weekend..I heard weather is gonna be nice

[STAGE 4.6]

Hey, we call u everytime we out but u always down in Pueblo so.....


U need to come out this weekend..I heard weather is gonna be nice

AAhhh!! ok, my bad ill try and an attend the next one? but my Roush aint fixed yet so ill have to limp along with my GT cause i tore a left side torque box on it openig day at the drags

[04roush2]

AAhhh!! ok, my bad ill try and an attend the next one? but my Roush aint fixed yet so ill have to limp along with my GT cause i tore a left side torque box on it openig day at the drags

That's fine man. U can bring the wifey's car