New test with pulley upgrade

[1BAD360R]

Well, the horsepower is not quite where I'd like it to be, but the torque certainly jumped up nice.. This is a safe tune with a/f at 11.5 and 93 octane. I was not present at the session, but boost was between 10-12psi.. Timing is 15 deg to 3500, then 16 deg on out.. Car pulled hard to 6300.. Weather conditions were muggy and about 58 deg.. On back to back runs, the car only lost 4 hp and 1 lb/ft, more than likely due to the computer adding fuel according to the a/f .. Once again, something happened to the tuners laptop, so he couldn't log IAT temps.. So, I really can't answer the question of " how much heat does the Eaton add at this boost level "..

[05 ROUSH RACER]

good numbers , congrats.

[jwhite]

nice numbers!

any details to the "new" pulley?

[1BAD360R]

nice numbers!

any details to the "new" pulley?

http://www.fnsweet.com/forums/showthread.php?t=43593

[jwhite]

http://www.fnsweet.com/forums/showthread.php?t=43593

doh.

i forgot about that thread.

[1BAD360R]

doh.

i forgot about that thread.

No prob ....