Discussion, technical information, and resources for the Roush 5.0 intake systems
Installation Manual - PDF
Installation Manual - PDF
I don't know anyone that has done this so maybe i am the first.
Roush included a BBK 65mm TB as part of their intake kit. My car also came with the Roush CNC ported SVO heads as part of the Roush 5.0 kit.
Here are some of the other mods to the car: Anderson B31 cam, 1.6rr, BBK LT's, BBK O/R...
This is to document what the Roush CNC Ported SVO Heads (that were offered as an option to the 5.0 intake kit) look like.
Finally got the car back, after months of waiting to get this intake installed, along with heads, cam, gears, subframes.
hey i am new to the forum but i was wondering if anyone could help me find a gasket kit for the roush 3 peice intake manifold i just bought the car a couple of days ago and the guy gave me the manifold with the car he had it on the car but the car is leaking oil into the water maybe someone can...
Does anybody have this information? I am very curious because Roush claims one thing, but from talking to other people im hearing that it only made 25hp over stock? What were the 94-95 Roush stage 3 mustangs putting down as far as hp and tq? Does anyone have some true dyno numbers? Im new to the...
Hey guys and gals im new to the site and was wondering if anyone has ever combined the roush 3pc intake system for a 5.0 with a turbo? I am currently in the middle of installing the roush intake on my car with my current turbo setup and would like any info i could get. I am also very curious to see...
Just trying to get a count of Local Users with the 94-95 5.0 Roush Intakes.
I have one. :D
All others chime in so i can get a count. Thanks.
hey guys i want a ROUSH 3pc intake for my 94 cobra i wannnt onee sooo bad have money just need the intake.
please help me out guys
I've been tossing the idea around to possibly sell my roush 3 piece intake, I will include 3 piece intake, tb,air filter and housing, and valve covers. I want to get a aftermarket upper/lower like a trickflow, or systemmax just because this thing is a pain in the ass to take off and put back on and...
Hey all I am considering parting out with my rare roush intake system. I believe I am going to go the route of a trickflow intake.
What all should I part out with to convert back to a trickflow manifold. Should I add or delete anything from this list of parts. Any advice will be appreciated...
Hey I was wondering if the kit came with a MAF calibrated for 24# injectors?
I know the kit recommends the Cobra ECU which is for 24# injectors. If the kits uses the stock MAF then which 24# MAF can I use on this kit for my cobra ecu and 24# injectors?
Hey guys I've got a Roush 5.0 Intake Kit with just about everything that originally came with the kit. How much is this worth? Thanks!
3 Piece Intake, Lower, Mid and Upper
Air box and filter
Gasket set, (intake, EGR, Throttle Body, IAB)
MAF Extension Harness
IAB wiring with connectors
Which EEC should I really have for this intake. When I bought it the guy tried to sell be a cobra comp. I didn't have the money at the time. I bought a A3m1 a while ago and it didn't work right didn't relize the harness is different for that one. Running a pos p3m right now.
Anybody got a vaccum diagram for a 95 roush intake?
Getting harder to find even on Ebay.....
Kind of interesting....
I was on this site 5 years ago probibly under the name soloking and no one knew anything about these intakes. The only information I got was the brochure lol. I wrecked my Tbird I had the intake in 5 years and started building GMs. Got another Ford and back working on this. Maybe now I can get...
This is a scan from the book "How to Tune & Modify Your 5.0-Liter Ford Mustang".
This intake was featured on the car in the below article...
Drove to Houston Yesterday and decided to watch the mpg. So by going the speed limit i hit 25mpg. I filled up when i left home and when i stopped for gas 200 miles later all i needed was 8 gallons. Not too bad.:)
RPP had a "garage sale" on fri/sat.
There were 2 or 3 roush upper half intakes for $50 each.
They also had 2 of the crossover/tb plenums for $10 each.
If you are interested in them I would contact Roush on monday morn e.s.t.
to see if they are still there.
I was wondering if anyone has ever had a Roush 5.0 intake on a flow bench? I am getting a set of heads done and the shop who is going to do it asked if i can supply the flow rating of the intake.
I know its short notice, but there is one on E-bay
Bid is currenty $1300, minus U/D pulley and hood of course.
If any one has information, instructions or spare parts for the 94/95 Roush twin plenum intake, please let me know.
I am going to use the intake on a 347 in my Cobra.
I need to find a hood for it. I know the Roush hoods are almost impossible to find, but I doubt that Roush made them in...
I was wondering if anyone has information on the GT 40 heads that were offered as part of this package. Were the CNC machined heads the iron gt 40's that came on the Cobra or could a person have ordered, the aluminum versions? If so would they have been the gt-40 "y" heads or the "x" style aluminum...
Curious if anyone has ran or seen one of these manifolds on a 5.8L engine.
Yes, I know the 5.8 has a taller deck height. PME makes a manifold spacer kit to adapt 5.0 to 5.8's.
I just sold a Mustang and picked up a GEN 1 Lightning and thinking about putting it on if it the accessories and...
hey guys i have a big problem with the roush 3 piece intake i just finished putting it on what a pain and now the car sputters and boggs when you get on the gas and when you rev it out and shift and jump back on the gas its back fires and feels like it shuts off for a second and it is slow i mean...
Seems like my pre and install pages got trashed. Can anyone point me to a .pdf of the manual?
I was browsing ebay as usual for mustang parts,and i bump into this roush intake up for auction in ebaymotors.com,I emailed the seller,and he says it includes all gasket,3 piece intake,bolts,and the bbk/edelbrock throttle body.So i just wanted to let my fellow roush members know there one for...
i am looking for a roush 3 peice intake for a 94-95 5.0. if any one see one for sale somewhere please e-mail me at firstname.lastname@example.org:usa:
I have a couple of the Roush 3 piece intakes for the 5.0L engine and am trying to find out something about them, like where HP and torque peaks are, airflow, etc.
Also looking for any factual information on their design and any stories from users, internal or external.
These are fasinating...
was sup fellow roush members,im new to this,glad to be in here.Ok,first i have a 94 mustang gt vert,im planning to put trickflow trackheat heads with 1.7 stud mount rockers,x-cam with roller lifters,trickflow pushrods,arp bolts ect,and a rare roush intake.I found the intake in ebay,and bought it...
Need help with finding a suitable hood for my 95 gt mustang. I'm installing a new Roush intake system and the regular gt hood won't clear. I would like to find the original Roush hood new or used to purchase. If not, what about the cobra hood as i like the looks but not sure if it will clear. They...
Looking for any info, facts, links and dyno sheets on the 94-95 style 3-piece Roush cowl induction systems. These things are works of engineering art. I picked some up but want to know their history, not much info floating around. Anyone know who made the hood or where one may be found?
I'm new to the group and found it after a search for a "heat extractor hood" brought up Smoke's page. Kevin, your car looks awesome, I have sent you a PM asking about your hood so when you get chance please get back to me.
Anyway I have ordered the Roush intake for 94/95 mustangs, Roush no...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.