+ Reply to Thread
Results 1 to 12 of 12

Thread: Brake Question? Which one?

  1. #1
    Join Date
    Jun 2007
    Posts
    345

    Brake Question? Which one?

    I found a site I can get the GT500 14" kit for my car for 1K that comes with lines, and pads for the rear that are like the link below.

    Ford Racing GT500 Brake Upgrade

    But I also I like these due to the fact they are 6 piston and come in my car color, WWMW do?

    1788.00



    Baer Brakes 6 piston FRONT Pro-Plus kit - 4261211

    Should I get the Vista Blue to match my car or go with traditional red / black?

  2. #2
    Join Date
    Aug 2007
    Location
    CT
    Posts
    175
    You can find the GT500 kit cheaper on eBay, I have heard of people finding it around $750-$800. Might be worth looking around. Thats a good price on the Baer kit though. Between the GT500 kit at $1300 and the Baer at $1800 I would get the Baers. But getting the GT500 kit cheaper makes it a nice deal too.

    I just looked on ebay, cheapest GT500 kit is $850, but it says calipers, so I wonder if rotors are included. Would have to get the SS lines separate. There is a complete kit for $1000.
    Black 2007 GT 5 speed -
    Roush Parts - 445 hp Roushcharger, suspension, O/R exhaust, short throw shifter, 427R wheels, Billet LCA
    Other parts - Nitto Invo 275/40R/18, Powerslot Rotors, Hawk HPS pads, CDC black grille, Steeda cowl hood.

  3. #3
    Join Date
    Mar 2006
    Location
    Vancouver, WA
    Posts
    1,382
    Ebay is your best bet for the GT500's, I've purchased 2 sets of take offs- the most recent was last month, they had 0 miles on them- complete still assembled on the spindles, included even the ABS rings, and sensors, dust shields- $670 with shipping...
    Kerry T


    06- ROUSH #06-0736
    Carmen 73mm pulley, JDM CAI & Tunes, Spydershaft, 20" Roush wheels & Extreme Springs, Tokico D-spec, 3.73's gears, FRPP Short tubes, MRT-h w/Off-Roads, Brembo's & 13" Steeda rear brake upgrade

    08- Shelby GT #0527
    Brenspeed Tune, Brembo's, Griggs rear susp, 3.73's, Truetrac, Spydershaft

  4. #4
    Join Date
    Jun 2007
    Posts
    345
    Quote Originally Posted by CT07GT View Post
    You can find the GT500 kit cheaper on eBay, I have heard of people finding it around $750-$800. Might be worth looking around. Thats a good price on the Baer kit though. Between the GT500 kit at $1300 and the Baer at $1800 I would get the Baers. But getting the GT500 kit cheaper makes it a nice deal too.

    I just looked on ebay, cheapest GT500 kit is $850, but it says calipers, so I wonder if rotors are included. Would have to get the SS lines separate. There is a complete kit for $1000.
    eBay is where I saw them for 1k and that is the cheapest I have seen them. I have seen take off kits cheaper, but they are all dinged up these are brand new in the box complete kit.

    I like the baer but I just don't know if I will get the use out of the extra 800.00 for that kit. Plus for 800 I can upgrade the GT500 kit to the Steeda kit. So I might get the kit on eBay for 1K.

    Have any of you guys tracked them and how well did they work out?

  5. #5
    Join Date
    Nov 2005
    Location
    Monroe, MI
    Posts
    3,221
    I'd get the GT500 setup and paint them red. IMHO the 6 piston Baer is on the side of overkill for a street car.
    2005 Redfire Roush Sport #05-2326, modded just abit

    Check out my Photobucket account to see the progress of her build up http://s32.photobucket.com/albums/d3...ush%20Mustang/

  6. #6
    RED ROUSH WA's Avatar
    RED ROUSH WA is offline Thankful for true unique cars that Jack built...
    Join Date
    Jul 2005
    Location
    Newman Lake,Washington State
    Posts
    6,190
    The Baer comes with the two piece rotors.(two piece better heat displacement)
    The GT500 I believe are a one piece rotor.
    Myself Baer's or Roush are my choice.
    Nothing wrong with Better Brakes there is no OVERKILL.

    ***** 2005 Roush Stage 2 *****
    2005 Driver X Roush, Driven by winner Erik Darnell, and now
    driven in memory of Lee Anne Darnell*****

  7. #7
    Join Date
    Aug 2007
    Location
    CT
    Posts
    175
    If you are going to get the Steeda upgrade for $800 on top of the $1000 for the GT500 kit then you might as well get the Baer kit to begin with. There is not much benefit to getting the slotted steeda rotors, but the two piece rotors in the Baer kit are a nice upgrade. The Baer 6 piston calipers are probably considerably better than the 4 piston Brembos as well. I dont think there is much to gain by going with the larger rear rotors in the Steeda kit either, they still have the same single piston caliper.
    Black 2007 GT 5 speed -
    Roush Parts - 445 hp Roushcharger, suspension, O/R exhaust, short throw shifter, 427R wheels, Billet LCA
    Other parts - Nitto Invo 275/40R/18, Powerslot Rotors, Hawk HPS pads, CDC black grille, Steeda cowl hood.

  8. #8
    Join Date
    Jul 2007
    Posts
    5
    You should be able to find the gt500 kit for 600. Got mine for less and came with everything. The rotors are a one piece.

  9. #9
    Join Date
    Mar 2009
    Location
    Central Florida
    Posts
    2,023
    Quote Originally Posted by flaming70vw View Post
    You should be able to find the gt500 kit for 600. Got mine for less and came with everything. The rotors are a one piece.
    I agree. The only downside is the GT500 brakes are very heavy compared to the "stock" brakes.

  10. #10
    Join Date
    Jun 2007
    Posts
    345
    Cheapest I could find the GT500 was 1K, but I have decided to just wait and get the Baer brakes. I like them and like others said I think the Baer would be a better system and I think I will spring for the Vista Blue ones.

  11. #11
    Join Date
    Sep 2008
    Location
    Houston, TX
    Posts
    244
    I got my Saleen brake kit on ebay for 950 bucks shipped. Same brakes as the Roush which is a Stoptech kit. With the savings I added rear stainless steel lines to go with that.


    07 GT, 5 speed, Hurst Shifter, 3.55 Gears, Steeda Axle-Back, Steeda Strut Tower Brace, JLT II Intake + 93 octane Race Tune by Bamachips, J&M Hotpart LCAs, Roush Stage 2 Suspension, Fays2 Engineering Watts Link, 18' Forged Aluminums, Spoilerstore GT500 rear wing.

  12. #12
    Join Date
    Mar 2009
    Location
    Central Florida
    Posts
    2,023
    Quote Originally Posted by jpetre View Post
    Cheapest I could find the GT500 was 1K, but I have decided to just wait and get the Baer brakes. I like them and like others said I think the Baer would be a better system and I think I will spring for the Vista Blue ones.
    Than you're not looking hard enough !!

    GT500 front calipers, rotors, pads, and dust shields can be had for $700-800 all day long. It's a deal when you can get a set for $500-600.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts