Watts Link Now Available!

[Rangersfan]

See the whole info here:
http://www.steeda.com/products/steed..._link_s197.php

Product Details
Replace your factory panhard bar with Steeda’s Watts Linkage. The Steeda Watt’s Linkage is all new and a definite “step above” EVERYTHING available today in the marketplace. When you combine this rear suspension element with the other track tested and proven suspension products, you will certainly end up with a suspension system that is the very best available anywhere. Steeda’s Watts Linkage eliminates the unwanted lateral motion inherent in the geometry of the factory panhard bar in its operating range. Eliminating the lateral movement of the axle will provide for a more stable and confidence inspiring feeling as your vehicle’s suspension moves through its range of motion.

Although the concept of the watts link is not new, Steeda has set itself apart from the competition through innovation. On a Watt's Link-equipped vehicle, the center pivot of the center link is the rear roll center. Steeda’s Watts Linkage allows the center pivot to move up or down to adjust your roll center up or down. Further, the lateral links should be horizontal and the center link vertical with the vehicle at ride height. Steeda’s Watts Linkage maintains this ideal geometry unlike the competition. When the links are not set up horizontal at ride height, there can be significant increases in scrub in one or both of the travel directions. In addition to the best performance, Steeda goes the extra mile to eliminate unwanted NVH with the use of polyurethane bushings.

This product is for the most discerning street performance enthusiast and also for those tracking their car. The loose axle feeling with the Panhard Bar (due to lateral axle movement) doesn't always inspire confidence when tossing the car around. The more stable feeling with a Watt's Linkage should allow a typical driver to control the car closer to the vehicle’s limit.